TOTA | 125 grain XL broadhead | 1-3/16-inch vented | fixed blade

XL Vented 4-Blade Broadhead — 125 Grain (3 Broadheads Per Pack)

 

Flies like your field points. Precision engineered to break bone.

Most broadheads force a tradeoff — a large cut or reliable penetration.

Tooth of the Arrow XL Vented gives you both.

 

• Flies true — no tuning headaches

• One-piece steel — no failure points

• Designed for pass-through penetration and heavy blood trails

 

Machined in the USA from heat-treated high-carbon steel, the vented ferrule stabilizes flight while reducing wind resistance — giving you accuracy without sacrificing impact performance.

Field-point flight. XL bite.

 

• Flies true even at longer distances

• Breaks bone without failing

• Built for pass-through penetration

• Resharpen and reuse — season after season

 

Built to perform when it matters — or we’ll make it right.

Our Recommendation:

Best for bowhunters who want a large cut without sacrificing accuracy or penetration. Ideal for deer, bear, and similar game.

Not sure which broadhead is right for you? Take our broadhead quiz

 

Tech Specs — XL Vented 4-Blade Fixed Broadhead

 

Grain Weight: 100 grain, 125 grain

 

Cutting Diameter: 1 3/16” (1.1875”)

 

Blade Count: 4

 

Blade Thickness: 0.040”

 

Blade Material: Heat-treated high-carbon steel

 

Ferrule Material: Heat-treated high-carbon steel

 

Tip Style: Tanto

 

Deployment: N/A (fixed blade)

 

Blades Replaceable: No — one-piece machined design

 

Blade Angle: 22.5° per side (45° total)

 

Made In: USA

 

Pack Size: 3 broadheads

 

Engineered for a large wound channel with minimal planing, and heat-treated for repeatable toughness.

 

Features

 

XL Cut, Field-Point Flight — Vented ferrule reduces drag and stabilizes the head so it flies like a field point while delivering a 1 3/16” cutting diameter on impact.

 

Vented Ferrule for Stability — Precision venting trims weight forward or aft (depending on your build) to reduce planing and improve in-flight stability at varying speeds.

 

One-Piece Machined Strength — Machined from a single bar and heat-treated for impact resistance — no seams, no weak spots.

 

4-Blade Cut-on-Contact — Square wound channel increases blood loss and tracking ease, especially valuable on larger game.

 

Razor-Ground Edge — 22.5° per side for a 45° total edge that balances bite and edge retention; resharpens easily in the field.

 

Tanto Tip Penetration — Reinforced point geometry designed to punch through hide, muscle, and bone without deformation.

 

Silent, Fixed-Blade Reliability — No moving parts, no rubber bands, no deployment failure — just consistent performance.

 

Beginner-Friendly Flight — Tuned to fly well even for shooters who are newer to broadheads, while still giving advanced archers the big-game performance they need.

 

Proudly Made in the USA — Fully machined, heat-treated, and packaged stateside.

 

 

 

FAQ

 

Q: Is this head only for experienced shooters?

 

A: No. While optimized for accuracy and a large cutting diameter, the vented XL is built to fly like a field point and is suitable for all archers — beginner to advanced — provided you use properly spined arrows and decent form.

Q: Will this fly like a field point?

 

A: Yes — the vented ferrule and compact profile reduce planing. When your bow is tuned and arrows are matched, expect field-point-level flight.

Q: What grain options are available for the XL vented?

A: 100 gr, and 125 gr.

Q: Are the blades replaceable?

 

A: No. This is a one-piece machined broadhead; blades are integral to the ferrule.

Q: What comes in each pack?

 

A: Each pack includes 3 broadheads.

Q: Is this suitable for deer and bear?

 

A: Yes. The large cutting diameter plus strong tanto tip make it an excellent choice for deer, hogs, and larger game like bear — use good shot placement and an appropriate arrow setup.

Q: Do I need a minimum draw weight or arrow speed?

 

A: There’s no strict minimum, but performance is best when arrows are spine-matched and your form is consistent. For very high arrow speeds you might consider heavier arrow builds to preserve spine stability.

Q: Why choose a vented head over solid?

 

A: Vented ferrules reduce unnecessary mass and improve aerodynamic stability, which helps reduce planing at various speeds while keeping the large cutting diameter and penetration performance.

Q: Is this made in the USA?

 

A: Yes — machined, heat-treated, and packaged in the USA.